web-archive-uk.com


Web directory, archive
Search web-archive-uk.com:


Find domain in archive system:
web-archive-uk.com » UK » F » FIDDES.CO.UK

Total: 126

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Fiddes - Garnet Polish
    Back to Shellac Polish Garnet Polish For over four generations Fiddes have blended the finest natural Shellac to produce a range of French Polishes that have become internationally established throughout the fine woodworking and antique restoration market Fiddes offer a selection of different types of flake and powdered Shellac mixed to traditional proven formulations that are suitable for both brush and rubber application A selection of Sprayable Shellac Polishes have also been formulated and are available on request Richer darker in appearance than both Button and Heavy French Polish Fiddes Garnet Polish affords a distinctive depth of colour typical of this variety of flake shellac It provides an ideal base colour from which to build an authentic Jacobean finish particularly on oak wood Application Fiddes Shellac Polishes are ideally suited for application on top of Fiddes complete range of Wood Stains Dyes Shellac Sealer NB Always finish with a coat of Fiddes Supreme Wax Polish or Mellow Wax Polish to further protect and enhance the natural beauty of your wood Application Brush Rubber Dry Time 20 30 Minutes Coverage 8 sqm per litre depending on substrate and method of application Thinners Finishing Spirit Methylated Spirits Coats Two coats on hardwood

    Original URL path: http://www.fiddes.co.uk/product.php?name=garnetpolish (2016-04-28)
    Open archived version from archive


  • Fiddes - Shellac Knotting
    to Shellac Polish Shellac Knotting For over four generations Fiddes have blended the finest natural Shellac to produce a range of French Polishes that have become internationally established throughout the fine woodworking and antique restoration market Fiddes offer a selection of different types of flake and powdered Shellac mixed to traditional proven formulations that are suitable for both brush and rubber application A selection of Sprayable Shellac Polishes have also been formulated and are available on request Fiddes Shellac Knotting has been formulated to provide a natural treatment for coating knots in timber and to aid prevention of resinous staining of decorative paint finishes Notes Shellac Knotting cannot guarantee against discolouration from the resin extractives or damage to the coating caused by excessive resin exudation Application Fiddes Shellac Polishes are ideally suited for application on top of Fiddes complete range of Wood Stains Dyes Shellac Sealer NB Always finish with a coat of Fiddes Supreme Wax Polish or Mellow Wax Polish to further protect and enhance the natural beauty of your wood Application Brush Rubber Dry Time 20 30 Minutes Coverage 8 sqm per litre depending on substrate and method of application Thinners Finishing Spirit Methylated Spirits Coats Two coats

    Original URL path: http://www.fiddes.co.uk/product.php?name=shellacknotting (2016-04-28)
    Open archived version from archive

  • Fiddes - Exterior High Build Wood Oil
    Filters and is VOC compliant To maintain renovate re apply following guidelines below Preparation Ensure all surfaces are clean dry and free from any previous finish Remove any fungal growth dirt or moss on old wood prior to application and ensure a preservative has been applied Sand the substrate with a medium 120 grade sanding paper or 120 grade sanding disk removing all traces of dust Application Apply in dry conditions Always test on a small area prior to initial application No primer required Minimum 3 coats recommended Fiddes Exterior High Build Wood Oil is formulated for application directly and does not require thinning First Coat Stir contents thoroughly before and during use Apply using a good quality bristle or synthetic brush and apply EVENLY and THOROUGHLY following the direction of the grain Leave to dry 4 6 hours in warm dry well ventilated conditions or preferably overnight Sand lightly with fine 320 grade sand paper Second Coat Apply as first coat evenly allowing good ventilation Leave to dry 4 6 hours in warm dry conditions or preferably overnight Third Coat Apply as above Clean applicators with White Spirit Notes Always test on a small area prior to major application

    Original URL path: http://www.fiddes.co.uk/product.php?name=exteriorhighbuildwoodoil (2016-04-28)
    Open archived version from archive


  • Fiddes - Oils
    and exterior wooden surfaces Danish Oil penetrates deep into the wood offering a durable natural water resistant low sheen finish Contains Tung Oil blended with resins and solvents offering an ideal treatment for Mahogany Teak and Oak Excellent for wood turning It does not leave a thick film peel chip or craze Raw Linseed Oil Obtained from the seed of the Flax plant Raw Linseed Oil remains popular with both the Furniture Restorers and fine Cabinet Makers On application Raw Linseed Oil produces a warm durable natural lustre Boiled Linseed Oil Boiled Linseed Oil is traditionally processed by the controlled oxidation of raw linseed oil Drying time is significantly reduced on application with and remains suitable for both interior and exterior wood substrates Teak Oil Based on special vegetable oils and solvents to give a quick drying clear penetrating seal to Teak Cedar and other bare woods to nourish and furniture White Polishing Oil A fine natural clear oil that is traditionally used in conjunction with Shellac based polishes to facilitate application Use sparingly Finishing Oil A blend of quick drying durable natural oils and resins formulated to maintain previously oiled interior surfaces Pure Tung Oil Also referred to as

    Original URL path: http://www.fiddes.co.uk/product.php?name=oils (2016-04-28)
    Open archived version from archive

  • Fiddes - Door Oil
    and free from any previous finish Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk removing all traces of dust Application Ensure all areas to be coated are extremely well ventilated during and after application Always test on a small area prior to initial application No primer required Maximum 2 coats recommended Apply at room temperature Fiddes Door Oil is formulated for application directly and does not require thinning First Coat Stir contents thoroughly before and during use and apply in a warm well ventilated room Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY following the direction of the grain Remove any surplus material immediately with a cloth carefully checking all areas for any excess application Leave to dry 4 6 hours in warm dry well ventilated conditions or preferably overnight Second Coat Apply as first coat THINLY allowing good ventilation Leave to dry 4 6 hours in warm dry well ventilated conditions or preferably overnight Clean applicator with White Spirit Notes Ensure all areas to be coated are extremely well ventilated during and after application has occurred Always test on a small area prior to major application Certain

    Original URL path: http://www.fiddes.co.uk/product.php?name=dooroil (2016-04-28)
    Open archived version from archive

  • Fiddes - Hard Wax Oil
    surfaces are clean dry and free from any previous finish Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk removing all traces of dust Application Ensure all areas to be coated are extremely well ventilated during and after application Always test on a small area prior to initial application No primer required Maximum 2 coats recommended Apply at room temperature Fiddes Hard Wax Oil is formulated for application directly and does not require thinning First Coat Stir contents thoroughly before and during use and apply in a warm well ventilated room Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush and lay EVENLY following the direction of the grain Leave to dry 4 6 hours in warm dry well ventilated conditions or preferably overnight Second Coat Apply as first coat THINLY allowing good ventilation Leave to dry 4 6 hours in warm dry well ventilated conditions or preferably overnight Clean applicator with White Spirit When the surface area is completely dry a light buff will further enhance the sheen level Notes Ensure all areas to be coated are extremely well ventilated during and after application has occurred Always test on small area prior to major application Clean applicators with White Spirit Certain dense or oily substrates may only require a single application and subsequently buffed to achieve the desired finish Longer drying periods may occur during application in cold damp or humid conditions Re Application To renovate previous application of Fiddes Hard Wax Oil lightly sand area with 150 grit sandpaper and re apply sparingly Coverage A single application will cover approximately 20 24 square meters per litre depending on the density of the substrate Packaging 5ml 250ml 1lt 2 5lt 25lt Tinted Hard Wax Oil A new

    Original URL path: http://www.fiddes.co.uk/product.php?name=hardwaxoil (2016-04-28)
    Open archived version from archive

  • Fiddes - Floor Reviving Kit
    or sealed wood floors and surfaces treated with Fiddes Hard Wax Oil Ensure all surfaces are free from dust and test on a small inconspicuous areas first Application Wash area with Fiddes Floor Surface Cleaner and allow to dry Take a clean cotton cloth and lightly apply with a small circular motion working well into the surface To obtain a uniform coverage always wipe evenly taking care to lightly remove

    Original URL path: http://www.fiddes.co.uk/product.php?name=floorrevivingkit (2016-04-28)
    Open archived version from archive

  • Fiddes - Liquid Floor Wax
    nourishes and protects whilst providing a lasting depth of sheen that naturally enhances the beauty of your wood flooring Easy to apply Fiddes Liquid Floor Wax may also be applied on previously treated surfaces to maintain or improve the existing patina Preparation Sand the wooden substrate in stages working with a medium sandpaper 120 grit through to a medium fine grade 180 220 grit Always sand in the direction of the grain pattern where possible ensuring the removal of any blemishes and glue residue prior to the application of Liquid Floor Wax Take care to remove all traces of sanding dust A coat of Fiddes Shellac Sealer or Clear Glaze is recommended on open grained wood flooring prior to application Application Take a clean cotton cloth and lightly apply in the direction of the wood grain where possible To obtain a uniform coverage always wipe evenly taking care to lightly remove any excess Floor Wax immediately with a separate clean absorbent cloth again following the direction of the grain pattern Best results are achieved when Fiddes Floor Wax is applied sparingly and worked in small areas at any one time Buff to desired sheen level by hand or mechanical polisher

    Original URL path: http://www.fiddes.co.uk/product.php?name=liquidfloorwax (2016-04-28)
    Open archived version from archive



  •  


web-archive-uk.com, 2017-12-18